Nickel A286 Product Guide

Applications | Specifications | Mechanical and Chemical Data | Tolerances

Overview

Nickel A286 is alloyed with iron to provide superior strength properties. It also exhibits high corrosion resistance and strength in low and very high temperatures. A286 can also be cold worked without difficulty. Because of its excellence fabrication properties, it is typically used in the automotive and oil industry, often as fasteners and turbines.

Common Trade Names

UNS S66286, UNS K66286, SAE J467, Incoloy® Alloy A286*, Pyromet® Alloy A-286*, ATI™ A286

*Incoloy® is a registered trademark of Special Metals Corporation.

*Pyromet® is a registered trademark of Carpenter Technology Corporation.

Other Resources

Safety Data Sheet | Weight Calculator | Mill Test Reports

Products

Nickel A286 Sheet

Applications

Automotive and Oil Industries
Fasteners
Turbines

Specifications

AMS
5525


Physical Properties A286
Density	0.286 lb/in3
Ultimate Tensile Strength	90 ksi
Yield Tensile Strength	40 ksi
Shear Modulus	11,000 ksi
Shear Strength	62 ksi
Hardness Rockwell \| Brinell	B106 \| 290
Elongation at Break Percentage	40%
Modulus of Elasticity	28,500 ksi
Poisson's Ratio	0.29
Machinability Percentage	28%
Melting Point	2,500-2,600 °F
Specific Heat	1.1 x 10^-1 BTU/lb-°F
Thermal Conductivity	104.4 BTU-in/hr-ft^2-°F
Electrical Conductivity	1.9% IACS

Chemistry Information
Element	Percentage
Cr	15
Ni	26
Ti	2
Mo	1.25
Al	0.2
C	0.04
Fe	55.2
Cr	15
Mo	1.25
Ni	26
Ti	2
Al	0.2
Fe	55.2
C	0.04

Open for Orders 24/7!