Have Specs Ready? Send Us Your RFP for a Fast, Competitive Quote.
Save Big on 36×48 Sheets – Better Yields, Lower Shipping.
Shop Stainless Tubing – Huge Selection, Great Deals.
Applications | Mechanical and Chemical Data | Tolerances
Nickel R405 is the round rod version of Nickel 400, and shares all of the same benefits. It is extremely resistant to corrosion. Additionally, it has high strength properties, good weldability and formability. The big difference between R405 and 400 is that R405 is only used in round rods. Its mechanical properties remain consistent from sub-zero temperatures up to 896 F (480 C). It is typically used in fasteners, calve parts, screw machine parts, water scrubbers, propeller shafts and pump shafts, and steam generator components.
UNS N04405, MONEL® Alloy R-405*, Monel Nickel-Copper Alloy, Alloy R405
*MONEL® is a registered trademark of Special Metals Corporation.
Safety Data Sheet | Weight Calculator | Mill Test Reports
Physical Properties R405 | |||||
Density | 0.318 lb/in3 | ||||
Ultimate Tensile Strength | 85-115 ksi | ||||
Yield Tensile Strength | 50-105 ksi | ||||
Shear Modulus | 8,900 ksi | ||||
Shear Strength | 54 ksi | ||||
Hardness Rockwell | Brinell | B85-100 | 165-240 | ||||
Elongation at Break Percentage | 15-35% | ||||
Modulus of Elasticity | 24,000 ksi | ||||
Poisson's Ratio | 0.32 | ||||
Melting Point | 2,370-2,460 °F | ||||
Specific Heat | 1.0 x 10^-1 BTU/lb-°F | ||||
Thermal Conductivity | 151 BTU-in/hr-ft^2-°F | ||||
Electrical Conductivity | 3.4% IACS |
Chemistry Information
|
|
Element |
Percentage |
Ni(+Co) | 63 min |
Mn | 2 max |
C | 0.3 max |
Fe | 2.5 max |
Si | 0.5 max |
S | 0.025 - 0.06 |
Cu | 28 - 34 |