Have Specs Ready? Send Us Your RFP for a Fast, Competitive Quote.
Save Big on 36×48 Sheets – Better Yields, Lower Shipping.
Shop Stainless Tubing – Huge Selection, Great Deals.
Applications | Mechanical and Chemical Data | Tolerances
Aluminum 5005 is known for its good formability and is commonly used in applications requiring high workability. 5005 is the weakest non-heat treatable alloy of aluminum, but can be hardened through cold working. Additionally, it has good corrosion resistance, weldability, and 5005 is easily anodized. 5005 is typically used in furniture, road signs, architectural paneling, automotive parts, and HVAC equipment.
UNS A95005, ISO AlMg1, Aluminium 5005-H34, AA5005-H34, Al5005-H34
Safety Data Sheet | Weight Calculator | Mill Test Reports
Physical Properties 5005 | |||||
-H34 | |||||
---|---|---|---|---|---|
Density | 0.098 lb/in3 | ||||
Ultimate Tensile Strength | 23 ksi | ||||
Yield Tensile Strength | 20 ksi | ||||
Shear Modulus | 3,700 ksi | ||||
Shear Strength | 14 ksi | ||||
Hardness Rockwell | Brinell | N/A | 41 | ||||
Elongation at Break Percentage | 8% | ||||
Modulus of Elasticity | 9,900 ksi | ||||
Poisson's Ratio | 0.33 | ||||
Melting Point | 1,170-1,210 °F | ||||
Specific Heat | 2.2 x 10^-1 BTU/lb-°F | ||||
Thermal Conductivity | 1440 BTU-in/hr-ft^2-°F | ||||
Electrical Conductivity | 52% IACS |
Chemistry Information
|
|
Element |
Percentage |
Al | 97 - 99.5 |
Mg | 0.5 - 1.1 |
Fe | 0 - 0.7 |
Si | 0 - 0.3 |
Zn | 0 - 0.25 |
Mn | 0 - 0.2 |
Cu | 0 - 0.2 |
Cr | 0 - 0.1 |