.080" x 3.0" Carbon Steel Rectangle Bar 1075 -Part #: mp-00001153

See what other people are making with this product in our gallery section >

Sold & shipped by Alpha Knife Supply

1 Dimension(s) for this product

Thickness: 0.08 "
Width: 3 "

Available Sizes for this Product

Read More Specifications See Product Guide

2 Select length below

11.6" (11.6 in.) - $26.55 wt. 1.32 lb.

3 Update Your Quantity and Add to Your Cart

QTY

$26.55 ea.

$26.55 for 1

Product Details, Specifications, and Technical Information

- A simple tough high carbon steel.
- 1075 is suitable for forging or stock removal.
- 1075 is especially suitable for hard use knives due to its toughness when properly heat treated.

This alloy is similar to 15N20 without 2% nickel.

This alloy been properly annealed and is in the soft condition. You do not have to do any non-standard wasteful processes before heat treating. The steel must be heat treated to get to a hardened state.

Alloy Comparison Table:

Dimension Name	Specification
Thickness	0.08
Width	3
Length	11.6
Alloy	1075
Temper	Annealed
Production Method	Cold Rolled
Material	Carbon Steel
Shape	Bar-Rectangle
Current	1 Business Day

Weight/Lineal Foot
0.82 pounds

Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it,you agree that any decisions you make regarding materials for your project are at your own discretion.

Chemistry Information: 1075 Carbon Steel
Element	Percentage
Fe	98
C	0.7 - 0.8
Mn	0.4 - 0.7
P	0.04 max
S	0.05 max

Can't find what you're looking for?

888-527-3331 or LiveChat

.080" x 3.0" Carbon Steel Rectangle Bar 1075 -Part #: mp-00001153

Product Details, Specifications, and Technical Information

- A simple tough high carbon steel. - 1075 is suitable for forging or stock removal.- 1075 is especially suitable for hard use knives due to its toughness when properly heat treated.

This alloy is similar to 15N20 without 2% nickel.This alloy been properly annealed and is in the soft condition. You do not have to do any non-standard wasteful processes before heat treating. The steel must be heat treated to get to a hardened state.

- A simple tough high carbon steel.
- 1075 is suitable for forging or stock removal.
- 1075 is especially suitable for hard use knives due to its toughness when properly heat treated.

This alloy is similar to 15N20 without 2% nickel.

This alloy been properly annealed and is in the soft condition. You do not have to do any non-standard wasteful processes before heat treating. The steel must be heat treated to get to a hardened state.